 
|
VE Series Vacuum Power Units
The power unit offers a dependable and economical performance for a wide variety
of conveying rates, distances, and materials. PCC precisely sizes each unit to
meet your requirements.
Printable Specifications
|
|
|
VB Series Vacuum Power Units
Designed for low to moderate rates in material conveying. With continuous
operation, this system runs quietly while improving the efficiency of your
plastics processing.
Printable Specifications
|
|
Director Series
Control Panels
The brains of a vacuum conveying system. It works to control the sequencing of
vacuum receivers, vacuum pump, dust collector, and a continuous run valve.
Printable Specifications
|
|
RN Series Vacuum Receiver
Receivers for Pellets
Receivers can be mounted at any point where resin delivery is needed. The
incorporated screen prevents the carry-over of pellet material back to the
vacuum pump.
Printable Specifications
|
|
RP Series Vacuum Receivers
for Dusty Materials
For use in the vacuum conveying of regrinds and/or dusty materials. The RP
Series filter bags prevents carry-over of dust back to the vacuum power unit.
Printable Specifications
|
|
LC Series Self-Contained
Compressed-Air Loaders
The LC Series vacuum loader is a space efficient, self-contained unit which uses
compressed air to convey raw materials at rates up to 800 PPH.
Printable Specifications
|
|
AFV Series Precision Additive Feeders
The AFV Series is a simple, easy to operate additive feeder designed to inject
color concentrates or other additive-type materials directly into a material
stream at the feed throat of an extruder or molding machine.
Printable Specifications
|
|
RD Series Dust Collectors
Works to remove any fines acquired during a fill cycle. Through a Director
Sequencing Controller, the dust collector back flushes the bags for a clean
operating system, preventing the dust from getting back to the central vacuum
pump.
Printable Specifications
|
|
Hardware
Components
Quality components to complete your material conveying system.
Printable Specifications
|
|
PT Series Pneumatic Tilters
The PT Series Pneumatic Box tilter offers smooth tilt action with easy on & off
placement.
Printable Specifications
|
 |
HS Series Surge Hoppers
The HS Series Surge Hoppers from Process Control are ideal for in-plant storage
of both raw materials and finished product.
Printable Specifications
|
