Exit

Tag Archive: video

  1. Material Clean-Out Procedure for the X2 Continuous Blender [Video]

    1 Comment

    Today’s entry features a quick video demonstrating the easy and straight-forward process of cleaning the material out of the hoppers and downcomer of an X2 Series Continuous Blender. The blender has been designed for easy clean-out and quick change over.

    [youtube=http://youtu.be/UVXdzkhcGK8]

  2. Metering Gate Comparison on Batch Blender Video

    Leave a Comment

    Check out this video of a Guardian Series 2 Batch Blender dispensing material from the metering gates.  One gate has the standard v-gate design (right) while the other (left) has a restrictor plate installed.  The restrictor plate gives processors the ability to finely control low rate ingredients for even greater batch accuracy.

    [youtube=http://youtu.be/XvaZ3IZxKeU]

  3. Video of Continuous Blender feeding Powder Material

    Leave a Comment

    Today’s post features a video of powder and pellet materials being fed into PCC’s X2 Gravimetric Continuous Blender.

    All ingredients are simultaneously metered in the correct blend ratios from individual weighed material hoppers. The ingredients flow through a cascade chamber into an integral downcomer. The downcomer preserves the blended material all the way to the extruder without demixing producing the best blend homogeneity.

    Click here for more information on PCC’s Continuous Blenders.

    [youtube https://www.youtube.com/watch?v=MjlfAN6I4B8?rel=0]

  4. Video of Continuous Blender Cascade Mixing

    Leave a Comment

    [youtube=http://youtu.be/yq6ORJdVV4M]

    Today’s post features the cascade mixing process in our X Series 2 Continuous Gravimetric Blender. All ingredients are simultaneously metered in the correct blend ratios by inclined augers (seen dispensing black and clear pellets) from individual weighed material hoppers. The ingredients flow through a cascade chamber into an integral downcomer. The downcomer preserves the blended material all the way to the extruder without demixing producing the best blend homogeneity.

    Click here for more information on PCC’s Continuous Blenders.

  5. Video: Metering Gate Comparison on Batch Blender

    Leave a Comment

    Check out this video of a Guardian Series 2 Batch Blender dispensing material from the metering gates.  One gate has the standard v-gate design (right) while the other (left) has a restrictor plate installed.  The restrictor plate gives processors the ability to finely control low rate ingredients for even greater batch accuracy.

    [youtube=http://youtu.be/XvaZ3IZxKeU]

  6. New Batch Blender Mixing Video!

    Leave a Comment

    PCC has made a new video of the mixing process of our Guardian Series 2 batch blenders.  The demo shows 95% virgin mixed with 5% color as being dispensed from the weigh hopper above.  Less than a 15 second mix cycle is all that is required to provide a homogenous blend for the process.

    [youtube=http://youtu.be/ntRUbrgDQe8]