Tag Archive: NPE

1. NPE 2015 Wrap Up

   April 1, 2015 10:08 am Leave a Comment

   Happy April to everybody and welcome back following one busy week. The Process Control booth at NPE 2015: The International Plastics Showcase displayed strong results during its week-long stay in Orlando, Florida. The booth featured a large number machines, a comfortable and new modern design, and was outfitted with an iPad lead retrieval system. The stars of the booth were the brand new Vibratory Blender, which Process Control was able to show off and explain plenty during the show.

   Process Control ran two different demonstrations this year, including a 2.5kg Guardian® Series 2 batch blender was equipped with extrusion control, running a full demonstration of how material flows through the system, and the 3 Layer Gravitrol® Extrusion Control Demo with HGB Weigh Hoppers with an all new EXB2 Operator Station Module. There were quite a few curious onlookers as both machines continued to draw in crowds all week. Other features were not forgotten, however. The X Series continuous blender received plenty of attention right up front, and a number of blenders on display drew potential customers. Not to mention the debuting RMX Operation Panel, which Process Control was happy to introduce and will be detailing here next week.

   Overall, the conference generated plenty of leads for Process Control – great results for a great show. With the digital lead retrieval input, booth personnel were able to write down very clearly what the patrons were interested in, and are working hard to get that information out now. The information gathered from these notes revealed a strong quality of leads in addition to quantity. Needless to say, Process Control is eagerly anticipating NPE 2018.

   

2. PCC at NPE 2015

   March 25, 2015 6:19 pm Leave a Comment

   Come visit us this week at NPE 2015: The International Plastics Showcase in Orlando, Florida at booth 4162! We’ve got lots of exciting things going on so come check out the live demonstrations of our Guardian® Series 2  and our 3 Layer Gravitrol®.

   
   

3. Sneak Peek of our booth for NPE2015! – Part 2

   March 18, 2015 9:43 am Leave a Comment

   

   With less than a week before NPE 2015: the International Plastics Showcase, Process Control Corporation is ready to go with our exhibit in the West Hall, Booth 4162. We are including a wide selection of our auxiliary machinery so that you can get a detailed look at what we have to offer. Be sure to stop by for live demonstrations of our gravimetric blender equipment and our new three layer Gravitrol® display. We are excited to be able to offer these demonstrations next week, but until then the preview of the equipment we’ll have on display continues.

   Last week we brought you a glimpse of our gravimetric batch and continuous blenders that we’ll have showcased at the show. This week includes a preview of our extrusion control, material handling, and scrap recycling machines.

    

   NPE Highlight – 3 Layer Gravitrol® Extrusion Control Demo with HGB Weigh Hoppers

   

   A live demonstration of a three layer extrusion control system will be running with the all new EXB2 Operator Station Module.

    

   NPE Highlight – RMX Refeed Machine with HGB2 Weigh Hopper

   

   Our popular RMX Refeed Machine from the ASR®  Automatic Scrap Recycling System will be set up with an HGB2 weigh hopper and a brand new feature that will be revealed at the show.

    

   GTA 7.5HP Film Grinder

   

    

   PF Series Powder Feeder

   

    

   Vacuum Receivers for Powder and Pellets

   

    

   EXG Supervisory System

   

    

   VNC Remote Viewer

   

    

   See you next week live from booth W4162 at NPE 2015.

    

   Click here to download a complimentary Expo Pass courtesy of PCC.

    

4. Sneak Peek of our Booth for NPE 2015! – Part 1

   March 11, 2015 11:15 am 1 Comment

   

   NPE 2015: The International Plastics Showcase is only a week and a half away! Process Control Corporation will be exhibiting in the West Hall, Booth 4162, with a wide selection of our auxiliary machinery. Stop by for live demonstrations of our gravimetric blending equipment and our new three layer Gravitrol® display. Until then, here is a preview of the equipment we will have on display at the show.

   This week we will be showcasing our gravimetric batch and continuous blenders that will be at the show, and next week there will be a preview of our extrusion control, material handling, and scrap recycling machines.

    

   NPE Highlight – BV Series Vibratory Blender

   

   PCC will be premiering our brand new BV Series loss-in-weight, vibratory, feeder-based blender at NPE2015. The blender is designed to produce precise, homogenous blends by weight, regardless of ingredient bulk density variations. Each hopper and feed system is mounted on a load cell making the vibratory more accurate than ever.

    

   NPE Highlight – 2.5kg Guardian® Series 2 Batch Blender with Gravitrol®

   

   Our innovative Guardian® Series 2 batch blender will be up and running with gravimetric extrusion control. Come see the difference that precise batch-to-batch dispensing can make for you.

    

   X Series 2 Continuous Blender

   

    

   2kg Guardian® Series 3 Batch Blender

   

    

   12kg Guardian® Series 2 Batch Blender

   

    

   Check back next week for Part 2 of our NPE 2015 Sneak Peek.

    

   Click here to download a complimentary Expo Pass courtesy of PCC.

5. Conference Schedule for 2015

   January 7, 2015 2:25 pm Leave a Comment

   Happy 2015, everyone!

   Here is Process Control’s current schedule for upcoming trade shows and conferences that we will be exhibiting at in 2015. If it looks like our paths will cross, be sure to stop by our tabletop or booth to speak with our sales representatives. We look forward to seeing you there!

   

   Polyethylene Films 2015
   February 3-5, 2015
   The Shores Resort and Spa
   Daytona Beach Shores, FL

   Website

   

   NPE 2015 – Booth W4162
   March 23-27, 2015
   Orange County Conference Center
   Orlando, FL

   Website

   

   Interwire 2015 – Booth 1805
   April 28-30, 2015
   Georgia World Congress Center
   Atlanta, GA

   Website

   

   Extrusion 2015
   November 2-3, 2015
   Omni Charlotte Hotel
   Charlotte, NC

   Website

6. Throwback to NPE 1976

   August 27, 2014 1:46 pm Leave a Comment

   With the NPE season quickly approaching, it’s amazing to see how far our company and the industry as a whole has come in the past few decades. Today we’re featuring pictures straight out of the PCC archive from NPE in 1976. Our booth featured one of our early blenders, a vacuum pressure power unit for railcar unloading, and welded silos… And check out that sweet orange carpet!

   

   

    

    

    

    

    

    

    

    

   Our machines have come a long way leading up to NPE 2015, but our core values remain the same – advanced design, innovative engineering solutions, and exceptional customer service for the plastics industry.

    

   It’s never too early to start planning – come visit us at Booth W4162 at NPE 2015 in Orlando, FL!

    

7. NPE 2012 Report

   June 21, 2012 11:20 am Leave a Comment

   The Process Control booth at the International Plastics Expo displayed strong results during its weeklong stay in Orlando, Florida.  The booth featured 12 machines, a sleek modern design, and was outfitted with an iPad lead retrieval system.  The stars of the booth were the gravimetric blenders, all newly outfitted with touch screen controls.

   A 2.5kg Guardian® Series 2 batch blender was equipped with extrusion control, running a full demonstration of how material flows through the system.  The X Series continuous blender received plenty of attention with its new brushless motors and touch screen interface.  The brand new 1kg Guardian® Series 2 batch blender caught the eye of many potential customers as the booth personnel swiftly demonstrated its user-friendly design.

   Overall, the conference generated over 300 leads for Process Control – well above average for companies of a similar size. With the digital lead retrieval input, booth personnel were able to write down very clearly what the patrons were interested in.  The information gathered from these notes revealed a strong quality of leads in addition to quantity.

   

   NPE 2012 Entrance

    

   

   The PCC Booth

    

   

   Talking with Attendees