Visit PCC at the Polyethylene Films 2013 in Daytona next week!

Comments Off on Visit PCC at the Polyethylene Films 2013 in Daytona next week!

PCC will be exhibiting at AMI’s Polyethylene Films 2013 Conference in Daytona, FL next week, February 5-6.  Come talk to Nick DePersio (our new eastern regional sales manager) and Jim Collins about what PCC products can do for your company! “AMI’s 11th annual Polyethylene Films conference will take place February 5-6, 2013 at The Shores Resort […]

Tags:

Magnet Option for Guardian Series 3 Batch Blender

Comments Off on Magnet Option for Guardian Series 3 Batch Blender

One of the latest features added to the auxiliary section of the extended base of the new Guardian 3 gravimetric batch blender is an option high powered magnet.  With a single magnet positioned directly beneath the mixer discharge gate, any ferrous contamination will be caught before going to the process.   This simple and low cost […]

Tags: ,

Special “Hopperless” Blender Design for Height Restrictions

Comments Off on Special “Hopperless” Blender Design for Height Restrictions

For Guardian 2 batch blending applications with severe height restrictions, as typically seen when the blender is mounted directly to the processing machine, PCC offers a design without the material hoppers.  The top of the blender frame, with metering gates, allows for a custom adaption plate to provide connection to the material supply hoppers and […]

Tags: ,

PCC Website – Complete Source for Auxiliary Equipment

Comments Off on PCC Website – Complete Source for Auxiliary Equipment

In today’s digital age, the backbone of every company is quickly becoming its online presence.  How quickly can a person find product information? Are methods of contacting the company readily available?  In addition to providing current news and product articles here on the blog, Process Control has been working for the past few years to […]

Tags: ,

Product Spotlight: Vacuum Receivers (Part 2)

Comments Off on Product Spotlight: Vacuum Receivers (Part 2)

Previously we considered the importance of proper receiver sizing. In particular, we considered a standard receiver with flapper discharge automatically loading a continuous gravimetric blender utilizing a sequencing control.   Now we list some receiver options and features: Capacities range from 0.07 up to 5.0 cubic feet with body diameters of 12”, 16” or 20”. […]

Tags: , ,

Product Spotlight: Vacuum Receivers (Part 1)

Comments Off on Product Spotlight: Vacuum Receivers (Part 1)

The next product spotlight from PCC will be a special two part blog on our line of Vacuum Receivers for material handling.  Today’s entry will focus on proper receiver sizing and how it affects the blending system. PCC manufactures a complete line of vacuum receivers for use in pneumatic conveying of plastic material. The RN […]

Tags: , ,

Start the New Year Right with Savings

Comments Off on Start the New Year Right with Savings

Happy 2013 from Process Control Corporation! To kick off the new year, we would like to invite you to take a look at how much you can save by investing in a PCC Blending System.  We have developed two blending systems to put you on the most efficient path to feed and mix accuracy while […]

Tags: ,

Merry Christmas from PCC!

Comments Off on Merry Christmas from PCC!

PCC would like to wish everyone a Merry Christmas and Happy Holiday season!

Completed ASR (Automatic Scrap Recycling) System – Part 2

Comments Off on Completed ASR (Automatic Scrap Recycling) System – Part 2

Here is the second part of last week’s post on the completed ASR system.  Shown below are pictures of the 100HP GF Series film grinder that has been equipped with a roll feed allowing additional scrap to enter the system.  An air eliminator (not pictured) has also been made to separate the conveying air from […]

Tags: ,

Advantage of PCC Venturi Design in Trim Removal System

Comments Off on Advantage of PCC Venturi Design in Trim Removal System

Trim removal systems are designed to pick up and convey edge and/or bleed trims generated during the production of products like film, tape and foam. These continuous trims are removed from the line by suction created in the inducer’s venturi section. The Process Control inducer design is particularly effective for handling tacky film. Process Control’s […]

Tags: